Value Design Ltd
  • Value Design Ltd
  • Services
  • Projects
  • Finite Element Analysis
    • Introduction to Basic FEA
    • Units
    • Co-ordinate Systems
    • FEA Procedure
    • Defining Objectives
    • Stress Concentration
    • Geometry import / clean up
    • Meshing
    • Material Properties
    • Boundary Conditions
    • Solvers
    • Investigating FEA Results
    • Reporting
    • Stress Theories
    • Cantilever Beam Worked Example
    • Pressure Vessel Worked Example
    • Shaft in Torsion Worked Example
    • Buckling Worked Example
    • Bearing (Contact) Worked Example
    • Non Linear Material Worked Example
    • Portal Frame Worked Example
  • BLOG
  • FAQ
    • What is FEA?
    • How much does FEA cost?
    • Should I de-feature CAD geometry prior to FEA?
    • What information should I send to you for an FEA quotation?
  • CONTACT

Blog

Categories

All
Boundary Conditions
FEA Tips And Tricks
Modal
News
Nonlinear
Oddball
Top Ten

Archives

May 2023
August 2022
May 2022
September 2021
August 2021
June 2021
February 2020

Work Experience

8/26/2022

0 Comments

 
Picture
​We recently had our first work experience student.

Brandon is from Ecclesfield School and has ambitions to be an engineer (or a pilot) so we gave him the opportunity to work on a project for us.

The project was a 3 tonne lifting beam, 6m long that was designed to BS EN 13155.

Read More
0 Comments

    Author

    Chris Hall

    View my profile on LinkedIn

    Categories

    All
    Boundary Conditions
    FEA Tips And Tricks
    Modal
    News
    Nonlinear
    Oddball
    Top Ten

    Archives

    May 2023
    August 2022
    May 2022
    September 2021
    August 2021
    June 2021
    February 2020

HOME

SERVICES

PROJECTS

FINITE ELEMENT ANALYSIS

BLOG

​
​FAQs

​CONTACT


​Tel +44 (0)114 240 1422

© COPYRIGHT 2023 ALL RIGHTS RESERVED.
  • Value Design Ltd
  • Services
  • Projects
  • Finite Element Analysis
    • Introduction to Basic FEA
    • Units
    • Co-ordinate Systems
    • FEA Procedure
    • Defining Objectives
    • Stress Concentration
    • Geometry import / clean up
    • Meshing
    • Material Properties
    • Boundary Conditions
    • Solvers
    • Investigating FEA Results
    • Reporting
    • Stress Theories
    • Cantilever Beam Worked Example
    • Pressure Vessel Worked Example
    • Shaft in Torsion Worked Example
    • Buckling Worked Example
    • Bearing (Contact) Worked Example
    • Non Linear Material Worked Example
    • Portal Frame Worked Example
  • BLOG
  • FAQ
    • What is FEA?
    • How much does FEA cost?
    • Should I de-feature CAD geometry prior to FEA?
    • What information should I send to you for an FEA quotation?
  • CONTACT