FEA Analysis Services
  • Value Design Ltd
  • Services
  • Projects
  • Finite Element Analysis
    • Units
    • Co-ordinate Systems
    • FEA Procedure
    • Defining Objectives
    • Stress Concentration
    • Geometry import / clean up
    • Meshing
    • Material Properties
    • Boundary Conditions
    • Solvers
    • Investigating FEA Results
    • Reporting
    • Stress Theories
    • Cantilever Beam Worked Example
    • Pressure Vessel Worked Example
    • Shaft in Torsion Worked Example
    • Buckling Worked Example
    • Bearing (Contact) Worked Example
    • Non Linear Material Worked Example
  • BLOG
  • FAQ
    • What is FEA?
    • How much does FEA cost?
    • Should I de-feature CAD geometry prior to FEA?
    • What information should I send to you for an FEA quotation?
  • CONTACT

Projects

​info@valuedes.co.uk
​Call 0114 240 1422

Engineering Projects


Our analysis expertise has helped our clients achieve their requirements in many industry sectors. Some of the projects we have delivered are as follows;
​
  • Delivered load case definitions, analysis specifications, FEA and design code assessments to FEM 1.001 and JSP 467 for class 1 high integrity nuclear lifting attachments. Client: AWE
  • Blast analysis using ANSYS for class 1 high integrity pressure vessel to ASME VIII Div 3. Client: AWE​
  • Response Spectrum Analysis using ANSYS finite element analysis program for class 1 nuclear mechanical handling system. Client: Amec
  • Design Code Assessment for nuclear class 1 overhead travelling crane to BS2573, BS5950 and JSP467. ​Client: SCX Special Projects​
  • Finite Element Analysis using ANSYS of Successor nuclear submarine main propulsion gearbox. Client: David Brown Gear Systems​
  • Harmonic analysis of turbine blades for vibration assessment. Client: Cummins​​
  • ​Gear tooth contact structural assessment using FEA and assessment to BS ISO 6336 for bespoke misaligned gear coupling on a wind turbine. Client: David Brown Gear Systems
  • ​Response Spectrum Analysis using ANSYS finite element analysis program for class 1 nuclear small bore pipework systems servicing the Pressurised Water Reactor on Trafalgar Class submarines. Calculations for pressure vessel supports to ASME III. Client: Rolls Royce Naval
  • Design Code Assessment of Sellafield B30 pond skiphandler grabs. Client: Butterley Engineering
  • Finite Element Analysis of Ford Transit rear axle housing and differential. Client: Dana
  • ​Finite Element Analysis using FEMAP / NASTRAN of Boeing 787 landing gear hydraulic actuators. Client: GE Aviation
  • Seismic calculations for motorised crane cable reel for handling nuclear waste to CMAA 70 standards. Client: Metool Products
  • Design Code Assessment of mechanical handling equipment for defueling tools on Trafalgar Class nuclear submarines for the FNF project. Assessment to B23573, BS5950 and JSP 467 . Client: Assystem Energy and Nuclear
  • ​​Design Code Assessment for offshore drag chain hanger installation. Client: Metool Products
  • Front End Engineering Design (FEED) study, ANSYS FEA, AutoCAD and design code verification to Lloyd's Register of Shipping Code for a Pipeline End Termination (PLET) mechanical handler and pipe grabs. Client: Royal IHC Ltd
  • RFEM FEA and design code assessment calculations to FEM 2.131 for mobile hoppers, boom feeders and ship loaders. Client: Samson Materials Handling  

Picture
Picture
Picture
Picture
HOME

SERVICES

PROJECTS

FINITE ELEMENT ANALYSIS

BLOG

​
​FAQs

​CONTACT


​Tel +44 (0)114 240 1422

© COPYRIGHT 2021 ALL RIGHTS RESERVED.
  • Value Design Ltd
  • Services
  • Projects
  • Finite Element Analysis
    • Units
    • Co-ordinate Systems
    • FEA Procedure
    • Defining Objectives
    • Stress Concentration
    • Geometry import / clean up
    • Meshing
    • Material Properties
    • Boundary Conditions
    • Solvers
    • Investigating FEA Results
    • Reporting
    • Stress Theories
    • Cantilever Beam Worked Example
    • Pressure Vessel Worked Example
    • Shaft in Torsion Worked Example
    • Buckling Worked Example
    • Bearing (Contact) Worked Example
    • Non Linear Material Worked Example
  • BLOG
  • FAQ
    • What is FEA?
    • How much does FEA cost?
    • Should I de-feature CAD geometry prior to FEA?
    • What information should I send to you for an FEA quotation?
  • CONTACT