Value Design Ltd
  • Value Design Ltd
  • Services
  • Projects
  • Finite Element Analysis
    • Introduction to Basic FEA
    • Units
    • Co-ordinate Systems
    • FEA Procedure
    • Defining Objectives
    • Stress Concentration
    • Geometry import / clean up
    • Meshing
    • Material Properties
    • Boundary Conditions
    • Solvers
    • Investigating FEA Results
    • Reporting
    • Stress Theories
    • Cantilever Beam Worked Example
    • Pressure Vessel Worked Example
    • Shaft in Torsion Worked Example
    • Buckling Worked Example
    • Bearing (Contact) Worked Example
    • Non Linear Material Worked Example
    • Portal Frame Worked Example
  • BLOG
  • FAQ
    • What is FEA?
    • How much does FEA cost?
    • Should I de-feature CAD geometry prior to FEA?
    • What information should I send to you for an FEA quotation?
  • CONTACT

Contact Us

​​[email protected]
Call +44 (0)114 240 1422

Contact Us

To discuss your requirements;
  • call from UK 0114 2401422
  • call from international +44 114 2401422
  • email [email protected]
  • or use the enquiry form

Value Design Ltd
Registered Office:
​26 Newton Gardens,
Chapeltown,
​Sheffield,
​S35 2YW.
Registration No: 11857518 (England & Wales)
VAT No: 320 9663 08

Enquiry Form

Submit

Sending Large Files

If you would like to send CAD files for a quotation, we request them in either SOLIDWORKS or STEP format. 

Please use a file transfer service such as WeTransfer to send the files, see the link below;

wetransfer.com

In the WeTransfer Upload Files Form,
Email To: [email protected]

We always aim to provide quotations within 24 hours.

HOME

SERVICES

PROJECTS

FINITE ELEMENT ANALYSIS

BLOG

​
​FAQs

​CONTACT


​Tel +44 (0)114 240 1422

© COPYRIGHT 2023 ALL RIGHTS RESERVED.
  • Value Design Ltd
  • Services
  • Projects
  • Finite Element Analysis
    • Introduction to Basic FEA
    • Units
    • Co-ordinate Systems
    • FEA Procedure
    • Defining Objectives
    • Stress Concentration
    • Geometry import / clean up
    • Meshing
    • Material Properties
    • Boundary Conditions
    • Solvers
    • Investigating FEA Results
    • Reporting
    • Stress Theories
    • Cantilever Beam Worked Example
    • Pressure Vessel Worked Example
    • Shaft in Torsion Worked Example
    • Buckling Worked Example
    • Bearing (Contact) Worked Example
    • Non Linear Material Worked Example
    • Portal Frame Worked Example
  • BLOG
  • FAQ
    • What is FEA?
    • How much does FEA cost?
    • Should I de-feature CAD geometry prior to FEA?
    • What information should I send to you for an FEA quotation?
  • CONTACT